Tripp Lite PDUBHV10 Dual Source Power Distribution Technical Details

Hot Swap

200-240V

10A

C13-C14 Outlet

Tripp Lite PDUBHV10 Dual Source Power Distribution Description

Tripp Lite PDUBHV10 Dual Source Power Distribution Unit
The Tripp Lite PDUBHV10 Dual Source Power Distribution Unit's PDU systems enable live-replacement of standard UPS systems for maintenance with no interruption of connected server or networking loads. Dual input power cables support PDU connection to separate Utility and UPS power sources. Manual transfer switch with lighted status indicators controls the source of power to connected equipment between Utility and UPS. Set the switch to UPS during normal operation and connected equipment will receive full-time conditioned power from the UPS. Set the switch to Utility to momentarily power connected equipment from the Utility line cord and bypass the UPS while the UPS system is removed and replaced with a fresh one. Once the new UPS is up and running with all data and electrical connections restored, set the switch back to the UPS setting to once again provide fully-conditioned UPS power to connected equipment.

Tripp Lite PDUBHV10 Dual Source Power Distribution Unit is universally compatible with any Tripp Lite or other brand of 200-240V UPS rated up to 1500VA with a C14 input cable option. Pair of detachable PDU input cables connect to separate Utility and UPS power sources (set of 2 C13-C14 interconnect cables included; user supplied alternate cabling supported). 8 C13 outlets support critical networking loads in both Utilty and UPS operating modes. 2U rackmount installation in 2 or 4 post racks with support for space saving rear-post mounting in the same rack space as your Tripp Lite PDUBHV10 Dual Source Power Distribution Unit.

What It Is and Why You Need It

• 2U rackmount hot-swap PDU enables live replacement of a standard UPS system without shutting down connected server and networking equipment
• Universally compatible with any Tripp Lite or other brand of 200-240V UPS rated up to 1500VA with a C14 input cable option
• Manual transfer switch with lighted status indicators controls PDU output between Utility and UPS power sources
• 2U horizontal rackmount form factor compatible with 2 or 4 post racks
• Separate PDU input cables connect to Utility and UPS power sources (pair of C13-C14 interconnect cables included, alternate input cordsets available)
• 8 Built-in C13 outlets continuously pass power to critical loads from selectable Utility or UPS input power sources

Tripp Lite PDUBHV10 Dual Source Power Distribution Specifications

	Power Protection Type:	Rackmount UPS Battery Backup

	Input Voltage:	200-240V
	Frequency:	50 / 60Hz
	Maximum Input Amps:	10A
	Input Connection Type:	UTILITY & UPS inputs/C13-C14
	Cord Length:	Pair of C13 to C14 interconnect cables included (6 ft / 1.8m)
	Recommended Electrical Service:	200V, 208V, 220V, 230V, 240V

	Watts:	2300 Watts
	Output Nominal Voltage:	200-240V

	Dimensions:	3.42" x 17.32" x 3.03"
	Weight:	7.7 lbs
	Outlets:	8 C13 outlets
		1 pass-through C13 outlet

Buy Tripp Lite PDUBHV10 Dual Source Power Distribution

Now Just $164.99 Save $178.01 Tripp Lite PDUBHV10 Dual Source Power Distribution - Hot Swap, 200-240V, 10A, C13-C14 Outlet

Tripp Lite PDUBHV10 Dual Source Power Distribution Pictures