Tripp Lite PDUB20 Dual Source Power Distribution U
Tripp Lite PDUB20 Dual Source Power Distribution U - Hot Swap, 100-127V, 16A, 5-15/20R Outlet
Now Just $174.99Save $197.01
Tripp Lite PDUB20 Dual Source Power Distribution U Technical Details
Tripp Lite PDUB20 Dual Source Power Distribution U Description
Tripp Lite PDUB20 Dual Source Power Distribution Unit
The Tripp Lite PDUB20 Dual Source Power Distribution Unit's PDU systems enable live-replacement of standard UPS systems for maintenance with no interruption of connected server or networking loads. Dual input power cables support PDU connection to separate Utility and UPS power sources. Manual transfer switch with lighted status indicators controls the source of power to connected equipment between Utility and UPS. Set the switch to UPS during normal operation and connected equipment will receive full-time conditioned power from the UPS. Set the switch to Utility to momentarily power connected equipment from the Utility line cord and bypass the UPS while the UPS system is removed and replaced with a fresh one. Once the new UPS is up and running with all data and electrical connections restored, set the switch back to the UPS setting to once again provide fully-conditioned UPS power to connected equipment.
The Tripp Lite PDUB20 Dual Source Power Distribution Unit is universally compatible with any Tripp Lite or other brand of 100-127V UPS rated 2200 to 2600VA with a 5-20P input plug. Pair of attached 5-20P PDU input cables connect to separate Utility and UPS power sources. 4 5-15R and 4 5-15/20R outlets support critical networking loads in both Utilty and UPS operating modes. 2U rackmount installation in 2 or 4 post racks with support for space saving rear-post mounting in the same rack space as your Tripp Lite PDUB20 Dual Source Power Distribution Unit.
What It Is and Why You Need It
- 2U rackmount hot-swap PDU enables live replacement of a standard UPS system without shutting down connected server and networking equipment
- Universally compatible with any Tripp Lite or other brand of 100-127V UPS rated 2200-2600VA with a NEMA 5-15P or 5-20P input plug
- Manual transfer switch with lighted status indicators controls PDU output between Utility and UPS power sources
- 2U horizontal rackmount form factor compatible with 2 or 4 post racks
- Pair of attached 5-15P PDU input cables connect to separate Utility and UPS power sources
- 4 Built-in 5-15R and 4 5-15/20R outlets continuously pass power to critical loads from selectable Utility or UPS input power sources
Power Protection Type: | Rackmount UPS Battery Backup | |
Input Voltage: | 100-127V | |
Frequency: | 50 / 60Hz | |
Maximum Input Amps: | 16A | |
Input Connection Type: | UTILITY & UPS input line cords both fitted with NEMA 5-20P input plug | |
Cord Length: | Utility input cable (10 ft / 3m) / UPS input cable (6 ft / 1.8m) | |
Recommended Electrical Service: | 100V, 120V, 127V | |
Watts: | 1920 Watt | |
Output Nominal Voltage: | 100-127V | |
Dimensions: | 3.42" x 17.32" x 3.03" | |
Weight: | 7.7 lbs | |
Outlets: | 4 NEMA 5-15R and 4 5-15/20R outlets | |
| 1 5-15/20R outlet | ||
Buy Tripp Lite PDUB20 Dual Source Power Distribution U
Now Just $174.99 Save $197.01 Tripp Lite PDUB20 Dual Source Power Distribution U - Hot Swap, 100-127V, 16A, 5-15/20R Outlet
Tripp Lite PDUB20 Dual Source Power Distribution U Pictures
Power Protection Coupons
Tripp Lite PDUB20 Dual Source Power Distribution U discount,rebates and cash back deals.

Power Protection Type:









